Quick Add
1-Way UHF Medium Gain Masthead Amplifier
Product Code: PROMHD11M
- Medium gain masthead amplifier
- F-Type connections
- 1 input 1 output
- Suitable for outdoor use
- Requires power
Discontinued
Please note this product has been discontinued, we'd recommend you consider the alternative product shown below...
Product Description
1-Way UHF Medium Gain Masthead Amplifier; 1 Input; 1 Output-16dB
Features:- This range of high-performance low-noise pre-amplifiers and multi-way mastheads includes both fixed and variable gain versions. Selected models can be powered at 5 to 12 volts, allowing powering directly from certain digital terrestrial set-top boxes or IDTVs which can provide 5V output at the aerial socket.
- Fully-screened amplifier modules in robust die-cast enclosures. Strong cast-in 'F' connectors.
- Free-draining moulded outer enclosures give easy access and cannot trap water.
- Low noise figures and well-filtered inputs. Sharp cut off below 400 MHz, helps avoid interference problems from nearby transmitters: CB, PMR, TETRA, HF and VHF amateur radio, etc.
- Variable gain models have inter-stage control to maintain good noise figure at reduced gain.
- All multi-way amplifiers can be powered via any output.
- Also available complete with power supply PROPSU11F (PROMHD11M-PS).
- With equipotential bonding point.
Technical Information:
Product Code | Ways | Gain | NF | Max Input | Power Requirement | Typical Applications |
PROMHD11L | 1 | 9dB | 1.8dB | 80dBV | 5 - 12V, 25 mA | Margin raising preamplifier |
PROMHD11M | 1 | 16dB | 1.7dB | 75dBV | 5 - 12V, 25 mA | For weaker signal areas |
PROMHD11H | 1 | 27dB | 1.8dB | 74dBV | 12V, 50 mA | Long downleads, splitters |
The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.
Related products
Alternative products
Product Description
1-Way UHF Medium Gain Masthead Amplifier; 1 Input; 1 Output-16dB
Features:- This range of high-performance low-noise pre-amplifiers and multi-way mastheads includes both fixed and variable gain versions. Selected models can be powered at 5 to 12 volts, allowing powering directly from certain digital terrestrial set-top boxes or IDTVs which can provide 5V output at the aerial socket.
- Fully-screened amplifier modules in robust die-cast enclosures. Strong cast-in 'F' connectors.
- Free-draining moulded outer enclosures give easy access and cannot trap water.
- Low noise figures and well-filtered inputs. Sharp cut off below 400 MHz, helps avoid interference problems from nearby transmitters: CB, PMR, TETRA, HF and VHF amateur radio, etc.
- Variable gain models have inter-stage control to maintain good noise figure at reduced gain.
- All multi-way amplifiers can be powered via any output.
- Also available complete with power supply PROPSU11F (PROMHD11M-PS).
- With equipotential bonding point.
Technical Information:
Product Code | Ways | Gain | NF | Max Input | Power Requirement | Typical Applications |
PROMHD11L | 1 | 9dB | 1.8dB | 80dBV | 5 - 12V, 25 mA | Margin raising preamplifier |
PROMHD11M | 1 | 16dB | 1.7dB | 75dBV | 5 - 12V, 25 mA | For weaker signal areas |
PROMHD11H | 1 | 27dB | 1.8dB | 74dBV | 12V, 50 mA | Long downleads, splitters |
The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.
Technical Specification
IEC or F Type
F Type
Number of Outputs
1
Number of Inputs
1
Low, Medium or High
Medium (16dB)
Internal or External
External
Amplifier Includes Power Supply Unit (PSU)
No
Amplifier Includes Full Output
No
Product Requires Power Supply Unit (PSU)
No
RED Class 0 or Class 1
Class 0
Width
45mm
Depth
90mm
Height
105mm
Weight
0.19kg
19/04/2024
15/04/2024
I researched for many TV aerials and my friend who was ex aerial rigger recommended me Blake aerials as you can’t go wrong with them that was his words and it was true
13/04/2024
Ok until Blake sold me an item they didn't have in stock ...
05/04/2024
Very good service as a company, very let down by sending out parts poorly packaged, must cost a fortune sending replacements out..
05/04/2024
Seem fine
Google Company Reviews
12/07/2024
Order fulfilled successfully and to my satisfaction.
11/07/2024
very quick delivery - and great service and product. will use again.
10/07/2024
Great price and product. Quick delivery too! Would recommend 100%👍🏻
05/07/2024
Product (UHF TV antenna) well built and sensibly priced. Efficient despatch and delivery
01/07/2024
Good customer service. Efficient. Profesional. Also a good selection of products. Recommend the business especially for the quick dispatch.
Discontinued
Please note this product has been discontinued, we'd recommend you consider the alternative product shown below...
Product Description
1-Way UHF Medium Gain Masthead Amplifier; 1 Input; 1 Output-16dB
Features:- This range of high-performance low-noise pre-amplifiers and multi-way mastheads includes both fixed and variable gain versions. Selected models can be powered at 5 to 12 volts, allowing powering directly from certain digital terrestrial set-top boxes or IDTVs which can provide 5V output at the aerial socket.
- Fully-screened amplifier modules in robust die-cast enclosures. Strong cast-in 'F' connectors.
- Free-draining moulded outer enclosures give easy access and cannot trap water.
- Low noise figures and well-filtered inputs. Sharp cut off below 400 MHz, helps avoid interference problems from nearby transmitters: CB, PMR, TETRA, HF and VHF amateur radio, etc.
- Variable gain models have inter-stage control to maintain good noise figure at reduced gain.
- All multi-way amplifiers can be powered via any output.
- Also available complete with power supply PROPSU11F (PROMHD11M-PS).
- With equipotential bonding point.
Technical Information:
Product Code | Ways | Gain | NF | Max Input | Power Requirement | Typical Applications |
PROMHD11L | 1 | 9dB | 1.8dB | 80dBV | 5 - 12V, 25 mA | Margin raising preamplifier |
PROMHD11M | 1 | 16dB | 1.7dB | 75dBV | 5 - 12V, 25 mA | For weaker signal areas |
PROMHD11H | 1 | 27dB | 1.8dB | 74dBV | 12V, 50 mA | Long downleads, splitters |
The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.
Related products
Alternative products
Great service and company to deal with