Quick Add
2-Way External Resistive Splitter
Product Code: PROUSS12
- External Inductive Splitter
- 2 Way
- Screw terminals
Product Description
2-Way External Resistive Splitter; 1 Input; 2 Outputs
Traditional unscreened wideband splitters with saddle and clamp connections. These units are suitable for splitting analogue aerial feeds in strong signal conditions where the use of distribution amplifiers or active splitters are unnecessary. The products can also be used as wideband combiners.
Features:
- Traditional saddle and clamp connections.
- 2 and 4 way models available.
- Power pass (20 V and 200mA max.) between common input and one output 'leg' allowing an upstream amplifier to be powered (models with 'P' suffix only).
- Suitable for indoor or outdoor use.
Technical Information:
| Product Code | Ways | Frequency Range | Configuration | Insertion Loss | Output Isolation | Power Pass* |
| PROUSS12 | 2 | 0 - 862MHz | Resistive | 8.2dB | - | No |
* To one split leg only, other leg(s) are DC-blocked.
Although passing frequencies to DC, the PROUSS12 must not be powered on any leg, otherwise damage may result.
Related products
Alternative products
Product Description
2-Way External Resistive Splitter; 1 Input; 2 Outputs
Traditional unscreened wideband splitters with saddle and clamp connections. These units are suitable for splitting analogue aerial feeds in strong signal conditions where the use of distribution amplifiers or active splitters are unnecessary. The products can also be used as wideband combiners.
Features:
- Traditional saddle and clamp connections.
- 2 and 4 way models available.
- Power pass (20 V and 200mA max.) between common input and one output 'leg' allowing an upstream amplifier to be powered (models with 'P' suffix only).
- Suitable for indoor or outdoor use.
Technical Information:
| Product Code | Ways | Frequency Range | Configuration | Insertion Loss | Output Isolation | Power Pass* |
| PROUSS12 | 2 | 0 - 862MHz | Resistive | 8.2dB | - | No |
* To one split leg only, other leg(s) are DC-blocked.
Although passing frequencies to DC, the PROUSS12 must not be powered on any leg, otherwise damage may result.
Technical Specification
Number of Outputs
2
Number of Inputs
1
Internal or External
External
Width
285mm
Depth
450mm
Height
630mm
Weight
0.12kg
19/04/2024
15/04/2024
I researched for many TV aerials and my friend who was ex aerial rigger recommended me Blake aerials as you can’t go wrong with them that was his words and it was true
13/04/2024
Ok until Blake sold me an item they didn't have in stock ...
05/04/2024
Very good service as a company, very let down by sending out parts poorly packaged, must cost a fortune sending replacements out..
05/04/2024
Seem fine
Google Company Reviews
31/08/2024
As described and arrived quickly. Well packaged
30/08/2024
Rapid and extremely efficient service. Ordered in the afternoon and delivered next morning. Exceptional service and excellent products which work impeccable. Would give this Company 11/10!
20/08/2024
Very helpful
12/08/2024
Easy to order and prompt delivery. Good quality brackets and pole.
05/08/2024
Bought custom sized melamine shelves. Easy process, quickly made up and delivered, and all as described.
Product Description
2-Way External Resistive Splitter; 1 Input; 2 Outputs
Traditional unscreened wideband splitters with saddle and clamp connections. These units are suitable for splitting analogue aerial feeds in strong signal conditions where the use of distribution amplifiers or active splitters are unnecessary. The products can also be used as wideband combiners.
Features:
- Traditional saddle and clamp connections.
- 2 and 4 way models available.
- Power pass (20 V and 200mA max.) between common input and one output 'leg' allowing an upstream amplifier to be powered (models with 'P' suffix only).
- Suitable for indoor or outdoor use.
Technical Information:
| Product Code | Ways | Frequency Range | Configuration | Insertion Loss | Output Isolation | Power Pass* |
| PROUSS12 | 2 | 0 - 862MHz | Resistive | 8.2dB | - | No |
* To one split leg only, other leg(s) are DC-blocked.
Although passing frequencies to DC, the PROUSS12 must not be powered on any leg, otherwise damage may result.
Related products
Alternative products
Great service and company to deal with