Quick Add
Surge Protection Device - SMA-Type, Male to Female
Product Code: PROSPD11SMA
- Easy installation
- Brass metal casing
- Strong protection and high reliability
- High discharge capability
- IP20 rated
Payment methods accepted
Related products
Alternative products
Recently viewed products
Product Description
Coaxial SMA Surge Protection Device
Our coaxial SMA SPD shields your aerial system's devices from power surges. Equipment such as TVs, amplifiers, and receiver boxes would benefit from having this line of defense.
What is a Surge Protection Device (SPD)?
Surge Protective Devices (SPD) are used to protect installations from electrical power surges known as “transient overvoltages”.
They are also used to protect sensitive electronic equipment connected to the installation, such as computers, televisions. Any equipment with sensitive electronic circuitry can be vulnerable to damage by transient overvoltages.
The effects of a surge can result in either instant failure or damage to the equipment only evident over a longer period of time. It is important to remember that protecting the electrical installation alone, and not the other services, could leave another route for transient voltages to enter the installation.
There are three different types of Surge Protective Devices:
Type 1 SPD: installed at the origin, e.g. main distribution board.
Type 2 SPD: installed at sub-level.
Type 3 SPD: installed close to the protected load. They must only be installed as a supplement to Type 2 SPD.
The PROception range of SPDs are all Type 2.
What causes transient overvoltages?
Natural transient overvoltages mostly occur due to direct lightning strikes but can also occur from indirect strikes too.
Man-made transients appear due to the switching of motors and transformers, along with some types of lighting. Historically this has not been an issue within domestic installations but more recently, installations are changing with the advent of electric vehicle charging, heat pumps have made transients much more likely to occur within domestic installations.
How do SPDs work?
The gas discharge tube (GDT) is sealed with ceramic and its interior consists of two or more metal electrodes with gaps filled with the inert gases, argon and neon. As the overvoltage passes through, it arcs between the electrodes, allowing current to flow to ground, thus protecting your devices.
Technical Information:
| Electrical Characteristics | ||||||
| Product Code | PROSPD11SMA | |||||
| Connection Type | SMA | |||||
| Interface Type | Male to Female | |||||
| Gas Discharge Tube Arrester | 90V/230V/350V | |||||
| Frequency Range | DC - 2.5GHz | |||||
| Operating Current | None | |||||
| Max. Discharge Current (8/20μs) (Imax) | 10KA | |||||
| Insertion Loss | <0.2dB | |||||
| Insulation Resistance | ≥5000MΩ | |||||
| Impedance | 50Ω | |||||
| Input Power | <20W | <50W | <100W | <200W | <400W | <500W |
| Initial Discharge Voltage | ≥50V | ≥70V | ≥120V | ≥190V | ≥280V | ≥280V |
| Protection Mode(s) | Common Mode | |||||
| Mechanical Characteristics | ||||||
| Technology | Gas Discharge Tube (GDT) | |||||
| Connection to Network | Connector Male to Female | |||||
| Mounting | Feedthrough | |||||
| Housing Material | Brass HPb59-1 GB4425-84 | |||||
| Working Temperature (°C) | -40 to 70 | |||||
| Degree of Protection | IP20 | |||||
| Failsafe Mode | Short-Circuit | |||||
| Disconnection Indicator | Transmission Interrupt | |||||
Technical Specification
Width
30mm
Depth
30mm
Height
70mm
Weight
0.09kg
15/04/2025
05/03/2025
Super
28/02/2025
First class website and easy to navigate when buying items from Blake UK. Was emailed every step for reassurance regarding my on-line order for a stress free purchase. Will definitely be doing another on-line order from Blake UK regarding a TV ariel along with a loft bracket as I will be buying a loft Ariel in a few months time for my home. 💯% satisfied with my order 👍
25/02/2025
I’m pleased with the ærial overall. I did have to fix two separate issues though… 1. Many of the elements were bent, some quite badly. Happily they all bent straight again without any fatigue fracture. 2. Many of the elements were not seated properly in the booms. In one case, a vertical element was touching one on the other boom. I was able to pull the unseated ones out to seat better but I’m not sure how long they’ll stay like this.
11/02/2025
Amazingly quick de.ivery. Ordered at the weekend , arrived on Monday !
Google Company Reviews
22/04/2025
Ordered an aerial, 4 way distribution unit & loft fitting kit. Very impressed with the items. They look & feel good quality, everything you need is included even the fixing screws. Very easy to fit.
18/04/2025
Brilliant service, fast delivery and fast to reply to an email query. Couldn't be better, a nice company to deal with.
15/04/2025
good price, good delivery
14/04/2025
09/04/2025
This is my second review for this same product. I bought a Twin Coax Surface Mount Switch Outlet Box, but could only get it to work if I physically held the aerial in place, so left a one star review. I quickly received an email from Chloe offering a couple of solutions to the problem, so I decided on a new switch with a soldered coax cable, which I'm pleased to say works perfectly. After receiving such a friendly and efficient service I have definitely changed my mind about Blake-uk.com and would not hesitate to recommend them.
Payment methods accepted
Related products
Alternative products
Recently viewed products
I was looking for some roof hardware and found what I needed at Blake at a competitive price. I'm glad I bought through them because the transaction was simple and the delivery lightning fast. Received what I ordered on time and happy with the quality. So definitely will use them again.